Identifying Nutrient Problems

Everything You Need to Know About Fixing Nutrient Problems

Plants need correct ratios and levels of properly-configured nutrients if they are to grow, bloom and yield.
During a plant’s life cycle, it needs different types and ratios of nutrients. If you are growing using hydroponics techniques, it is especially important to provide proper nutrients in correct ratios at the right time.

That’s because hydroponics gardens do not use soil (which contains nutrients) but instead use sterile root zone media that needs all nutrients added to it so plants can uptake nutrients needed for growth.

Plants suffer when they are fed the wrong kind of nutrients, when they are fed nutrients at the wrong time, when they are fed too much nutrients, or when they are not fed enough nutrients. They also suffer if nutrients are fed, but are not biologically available for uptake into the plant.

The availability of nutrients is affected not just by how much nutrients a gardener provides plants, but by the root zone environment and other factors. For example, the acidity or alkalinity of nutrient water affects whether plants can uptake nutrients.

So if you are experiencing nutrient-related problems, first start by checking the pH of your nutrient water and root zone media to ensure that the pH is in the ideal range between 5.8 and 6.3 and use this handy guide to identify nutrient problems of your plants.


Macronutrients are elements that plants most need. Macronutrients are nitrogen, phosphorus, potassium, calcium, magnesium and sulfur, with nitrogen, phosphorus and potassium being most commonly recognized as macronutrients.


Micronutrients are elements that plants need in smaller amounts; they are sometimes called trace elements. These include iron, manganese, copper, zinc, molybdenum, cobalt, boron and chlorine. Calcium, magnesium and sulfur and sometimes classified as micronutrients.

Nitrogen – (N)

Nitrogen deficiencies often appear first in older leaves, and will manifest as a light green overall appearance.

As symptoms progress, the leaves turn a yellow color and stems become weak and lower leaves drop off. Necrosis develops in older leaves. New growth becomes weak and spindly. Tops and roots grow poorly.

When plants are in the mid to later growth or flowering stages, older growth and large fan leaves may show nitrogen deficiency.

This is normal during the late stage of floral development because plants near the end of their lives are using up their nutrient and carbohydrate reserves. As leaves turn completely yellow, remove them from the plant.

Nitrogen excess turns foliage very dark green and can make plants susceptible to drought, disease and insect predation.

Nitrogen is crucial to photosynthesis and reproductive function. Nitrogen makes proteins and is essential to new cell growth. Nitrogen is mainly utilized for leaf and stem growth, as well as overall plant size and vigor.

Nitrogen moves easily to active young shoots and leaves and moves more slowly to older leaves. Nitrogen is involved in the structuring of amino acids, enzymes (specialized proteins that perform duties inside plants), proteins and nucleic acids. All of these are essential for cell division and most other plant functions. Obviously, nitrogen is essential to plant growth.

The “salts” commonly used as a source of nitrogen are: potassium nitrate (KNO3), ammonium nitrate (NH4N03) and calcium nitrate (Ca (N03)2.4H2O).

Nitrate is transported via xylem to all parts of the plant, where it participates in nitrogen assimilation. Nitrate is stored in cell vacuoles and fulfills important functions in the osmo-regulation and anion-cation balance in plant cells.

Inorganic nitrogen is reduced to ammonia and incorporated in organic molecules. Ammonium in the roots is most commonly stored as organic nitrogen.

This reaction is carried out by two enzymes, nitrate and nitrite reductases. Nitrate is first converted into nitrite by nitrate reductase; then, nitrite is reduced into ammonia by nitrite reductase.

Conversion of nitrate into nitrite occurs in the cytoplasm. Nitrate reductase consists of FAD, cytochromes [Fe2/Fe3] and molybdenum [Mo(V)/(VI)].

These components form integral parts of the electron transport chain through which electrons are used to reduce nitrate to nitrite. If high nitrate concentrations are present it can also be transported to the leaves where it is then reduced.

Glutamine synthetase and glutamate synthase are key enzymes in conversion of ammonium into glutamine. It is then converted into asparagine, arginine and allantoin act as basic sources of nitrogen for all macromolecules biosynthesis.

You should daily monitor your plants, focusing on their leaves. If you see pale leaves with a yellow tinge like the picture, you may have a nitrogen deficiency. Such deficiency can slow growth, decrease harvest size and damage the overall health of your plants.

The best ways to avoid nitrogen deficiency is to keep your root zone pH in the ideal 5.8 to 6.3 range.

Phosphorus – (P)

Phosphorus deficiencies show up in older growth first. You will see leaf tips curling downwards.

When phosphorus is deficient, slow and spindly plants with reduced growth will result.

Phosphorus deficiency leaf damage often shows itself as patches that are dull dark green to bluish green. In severe cases, older leaf and petioles turn reddish purple.

Younger leaves appear yellowish green with purplish veins when nitrogen is deficient, but will have dark green veins when phosphorus is deficient.

Necrotic spots occur on leaf margins in advanced stages of phosphorus deficiency. Leaf tips look like they have been burnt.

Phosphorus deficiency is most common when ph is above 7 or below 5.5. Phosphorus will bind with soil very easily and this can cause excess phosphorus. Excess phosphorus can create deficiencies of zinc and iron.

Plants use phosphorus for photosynthesis, respiration, storing carbohydrates, cell division, energy transport (ATP, ADP), nucleic acids, enzymes and phospholipids.

Phosphorus builds strong roots and is vital for seed and flower production. Highest levels of phosphorus are needed during germination, early seedling growth and flowering.

Some crops require lots of phosphorus, but most require more potassium and nitrogen and magnesium than phosphorus. Several types of hydroponics plants need far more phosphorus during flowering than during vegetative growth phase.

Excess phosphorus causes decrease in the uptake of zinc, iron and copper- which starts a chain reaction of other macro and micro nutrient deficiencies.

When temperatures drop below 55 degrees Fahrenheit (12 degrees Celsius), plants have a hard time uptaking phosphorus.

Phosphorus is present in the plant as inorganic phosphate (Pi), or bound to a carbon atom. Phospholipids in bio-membranes contain a large amount of phosphorus. In these molecules phosphorus makes a connection between a diglyceride and an amino acid, amine or alcohol via a phosphate- ester bond.

Phospholipids consist of a hydrophobic tail, the diglyceride, and a hydrophilic head containing PO4. Membranes consist of two monolayers of phospholipids known as a lipid bilayer. The hydrophilic end of the phospholipids are oriented towards water (outward) while the hydrophobic ends are orientated inwards.

Phosphorous plays a very central role in determining the total energy metabolism of the plant because it forms energy-rich phosphate esters (C-P) such as glucose-6-phosphate.

Energy released during the glycolysis, oxidative phosphorylation or photosynthesis is used to synthesize ATP and this energy is liberated during the hydrolysis of ATP in ADP and inorganic phosphate. ATP is unstable and therefore turns over rapidly.

Plant cells contain two different forms of phosphate storage. Within the metabolic storage, phosphate is primarily stored as phosphate esters which can be found in the cytoplasm and mitochondria of the cell.

With non-metabolic storage, phosphate is stored as inorganic phosphate (Pi) in vacuoles.

Phosphorus regulates starch production in chloroplasts. ADP-glucose-pyrophosphorylase, an enzyme involved in the synthesis of starch, is inhibited by Pi and stimulated by triose-phosphates.

Phosphorous availability has a direct affect on the energy balance in the cell and nucleic acid biosynthesis.

Phosphorus deficiency can cause reduction in growth rate and show up as dark-green coloration of leaves, caused by accumulation of chlorophyll in leaves.

Potassium – (K)

Potassium deficiencies show first in older leaves and are displayed as: yellowing; singed or scorching of leaf margins with small necrotic areas that start small and get bigger; brittle stems accompanied by withering leaf tips; interveinal chlorosis starting at the base of young leaves; reddening and upwards leaf curl in older leaves.

In vegetative stage, plants develop too slow and are stunted. In bloom phase, flowers develop slowly and fail to achieve normal size. Deficiencies of potassium are a major cause of small harvests.

Excess potassium interferes with calcium and magnesium uptake.

Potassium is essential in function and formation of enzymes and proteins. It is also essential in regulation of osmotic pressure and in most metabolic cellular processes.

Calcium – (Ca)

Deficiencies show first in new, young growth. Calcium moves slowly within plants and concentrated in roots and older growth. That’s why young growth shows deficiency signs first.

Calcium deficiency symptoms include: leaf tips, leaf edges and new growth turn brown and die; chlorosis, necrosis, & distorted leaf margins; leaf tips hooking, turning brown and black, and dieing off.

Deficiency is not the only problem associated with calcium. If too much calcium is present early in a plant’s life cycle, growth is stunted. In other phases of growth, calcium excess interferes with magnesium and potassium uptake.

Calcium is transported via water to plant tissues, but if calcium levels in root zone media are too low, calcium deficiency can occur regardless of what levels are in the plant aboveground.

Because calcium is immobile, it cannot be easily translocated to the region of active growth in the shoot tip. Thus, calcium deficiency can cause severe reduction in new growth.

Although calcium may be adequate in the lowest leaves, levels in the meristematic upper plant region can still be low, causing defective upper leaf growth followed by necrotic patches in young leaves.

During early blooming phase, calcium deficiency can affect shoot growth, resulting in abortion of flower and bud structures.

Moderate calcium deficiency results in bended or twisted leaves, along with white streaks or white leaf margins in new leaf growth.

Calcium deficiencies make roots stubby and twisted and can cause root death.

Severe calcium deficiency can destroy all new growth and cause leaf mutations.

Calcium is crucial to cell elongation and is an important component in cell walls. It acts as a binding agent between cells and enhances uptake of negatively charged ions such as nitrate, sulfate, borate and molybdate.

Calcium is important for uptake of most macro and micro nutrients. Calcium is responsible for strong growth and very important in bud set and water uptake.

Calcium is a major constituent of cell walls, is critical to root and leaf development, seed production, pollen germination, cell mitosis, cell division and floral maturity.

Calcium binds primarily to cell walls and cell membranes. The high concentration of calcium in the cell wall and cell membranes provides rigidity to the plant cell wall structure. The absence of calcium causes degradation of the cell wall and lead to a softening of the plant tissue.

Adequate calcium helps plants resist fungal infections, which are often a big problem in hydroponics grow rooms.

Calcium plays a vital role in cell and root replication.

Magnesium – (Mg)

Magnesium deficiencies show first in older, lower leaves. The symptoms start from the margin inwards. The leaf mid-rib and veins remain green while leaf margins are yellow or whitish, sometimes leaving a green arrowhead shape in the centre of the blade.

Interveinal chlorotic mottling or marbling of older leaves proceeds toward younger leaves as magnesium deficiency becomes more severe. This is sometimes accompanied by leaf tips curling upwards.

Chlorotic interveinal yellow patches can occur near leaf centers. In these cases, leaf margins are the last to turn yellow.

Interveinal yellow patches then progress to necrotic spots or patches and scorching of the leaf margins. In some cases, leaves die and drop off.

Magnesium shortages result in defective bud production and inadequate bud development.

Excess magnesium interferes with calcium and potassium uptake.

Plants use magnesium to: produce chlorophyll; regulate enzymes for transport of nutrients and carbohydrates in the plant; cell replication; seed production.

Magnesium is an important co-factor in production of ATP, the compound that helps plants transfer energy. It is also a bridge between ATP and enzyme activity.

Flowering and fruiting plants use more and more magnesium as they progress towards maturation and harvest.

Magnesium helps plants generate energy through photosynthesis and is also crucial to protein synthesis.

To augment magnesium, use Magnesium Sulfate, or simply known as Epsom Salt.

Sulfur – (S)

Deficiencies show up on older leaves first. Then they show up on younger leaves, turning them light green, then yellow. These symptoms are accompanied by slow growth. Leaves lose color, but veins remain green.

Sulfur deficiency symptoms are easily recognizable and are frequently confused with the nitrogen deficiency symptoms.

Sulfur deficiency causes small and spindly plants with short, slender stalks and reduced growth rate with delayed maturity.

An overdose of sulfur can cause premature dropping of leaves.

Some plants require as much sulfur as they do phosphorus. Sulfur is a component of cystine and methionine (amino acids that make up plant proteins). Sulfur is therefore a component of plant proteins.

It also has a major role in root growth and chlorophyll production. Sulfur is essential to seed production and overall plant hardiness. It is an enzyme activator and coenzyme compound. Sulfur enhances flavor and odor; it also is a formative part of chloroplasts and nucleic acid proteins. Sulfur deficiency decreases protein synthesis and causes significant reduction in leaf chlorophyll levels.

Boron – (B)

Deficiencies show up first in younger leaves; they turn yellow. Boron deficiencies resemble calcium deficiencies. Symptoms include stunting, discoloration, death of growing tips, and floral abortion.

Boron deficiencies stunt roots, mutate leaves, and create brittle leaves that appear bronzed or scorched.

Boron deficiency symptoms first appear at growing points. This results in a stunted appearance and short internodes (rosetting). Both the pith and epidermis of stems may develop hollow, roughened or cracked stems.

Leaf margins discolor and die backs. Necrotic spots develop between leaf veins. Deficient leaves become thick and they may wilt with necrotic and chlorotic spotting.

If you have a potassium deficiency, plants have a hard time absorbing boron.

Excessive boron can cause the same kinds of problems as calcium deficiency cause. To complicate matters, the symptoms of excess boron can resemble the symptoms of deficient boron.

Boron is used for sugar transport within the plant. It helps with cell replication, production of amino acids, pollination, seed production, carbohydrate synthesis and transport, cell division, differentiation, maturation, respiration and growth, and water uptake.

Boron is essential for plant growth but its mode of action is poorly understood. Boron is taken in by roots and transported via xylem to other parts of the plant. In the cell membrane it is mainly present as a borate ester. Boron is involved in lignification of cell walls and in differentiation of xylem.

Boron plays a regulating role in synthesis of cell walls. as well as in stabilization of constituents of the cell wall and cell membranes. Boron deficiency immediately results in inhibition of primary and secondary root growth.

Boron regulates phenol metabolism and synthesis of lignins by forming a stable borate ester with phenolic acids.

Cobalt – (Co)

Deficiencies are rare, but express themselves as chlorosis of younger leaves.

Cobalt is a chelation “bridge” that assists uptake of other metals and nitrogen fixation. It assists enzymes related to manufacture of aromatic compounds. It is also required for a few bacteria and algae.

Cobalt is essential to proper use of nitrogen Three enzyme systems of Rhizobium bacteria are known to contain cobalamin. There’s correlation between cobalt concentration, nitrogen fixation and root nodule development.

Cobalt is required for methionine synthesis, ribonucleotide synthesis and synthesis of methylmalonyl-coenzyme A mutase. The latter is necessary for the synthesis of leghemoglobin, which plays a major role in protection of nitrogenase against oxygen, which is able to irreversibly damage the enzyme.

Copper – (Cu)

Deficiencies show up first on youngest leaves, young tips, buds and shoots. Older leaves develop chlorosis, growing tips die and bud development is small. Copper deficiencies cause irregular growth and pale green leaves that wither at leaf margins.

Leaves at top of the plant wilt first, followed by chlorotic and necrotic areas on leaves, and necrosis of the apical meristem (the center stem of the plant).

Leaves on top half of plant show unusual puckering with veinal chlorosis. Copper deficiencies also show on the leaf, where the petiole joins the main stem of the plant beginning about 10 or more leaves below the growing point.

Excess copper is extremely dangerous to plants. Plants can develop iron chlorosis, stunted growth and stunted root development. Toxic buildup of copper occurs quicker in acidic soils.

Copper activates several enzymes, is needed for photosynthesis, and assists metabolism of carbohydrates and proteins. It intensifies color and flavor. It is essential in several enzyme systems and in plant respiration.

Copper is a divalent cation and is taken up by the plant as Cu+ or as a copper chelate complex and transported via xylem and phloem.

Copper deficiency immediately harms activity of copper-containing enzymes, but remember, an excess of copper is toxic to plant cells.

Chlorine – (Cl)

Believe it or not, chlorine is essential for plant growth. It’s needed for photosynthesis. It’s an enzyme activator that assists production of oxygen from water and in water transport regulation.

Plants use chlorine as chloride ion. Chlorine is useful as a charge balancing ion and for turgidity regulation, keeping plant cells free of infection by disease. It helps open and close stomata by increasing osmotic pressure in cells.

Excess chlorine causes burnt tips and margins on young leaves. If chlorine levels are too high, cuttings will not root well, and seeds may not germinate.

High chlorine levels also cause leaves to take on a yellowish bronze color, and they are slow to develop. Chlorine is commonly used to treat drinking water, so you are far more likely to see an excess of chlorine in your garden rather than a deficiency.

If you determine that chlorine is at toxic levels in your garden, get a reverse osmosis unit or distiller to remove chlorine from the water you use for your plants.

Molybdenum – (Mb)

Deficiencies show up in older and middle-aged leaves first, and then show up in younger leaves.

Molybdenum is rarely deficient in most plants, but chlorosis symptoms similar to nitrogen deficiency are typical of molybdenum deficiency, along with scorching and strapping of leaf margins.

Molybdenum deficiency often occurs when sulfur and phosphorus are deficient. It can reveal itself as interveinal yellow spotting and mottling of older leaves. Deficiency also shows as pale leaves (similar to nitrogen deficiency), with some marginal leaf chlorosis. New leaves may twist and leaves may cup and thicken.

Excessive molybdenum looks like iron or copper deficiency.

Molybdenum is needed for the reduction of absorbed nitrates into ammonia prior to incorporation into amino acids. It performs this function as part of the enzyme nitrate reductase.

In addition to direct plant functions, molybdenum is used for nitrogen fixation by nitrogen-fixing bacteria.

Molybdenum is primarily present in the form of MoO4. Depending on the environmental conditions a molybdate ion can accept one or two protons. Polyanions such as tri- and hexamolybdate can be formed under certain physiological conditions. Molybdenum (Mo) has limited mobility in plants and is apparently transported through the xylem and phloem.

Several enzymes are known to use Mo as a co-factor. The two most important molybdenum-containing enzymes are nitrogenase and nitrate reductase.

Molybdenum is directly involved in the reduction of nitrogen. Nitrogen molecules bind to molybdenum atoms in the nitrogenase complex. After activation of the nitrogenase complex, the iron-molybdenum complex changes its structure and as a result reduction of nitrogen occurs. The electrons required for this reduction are supplied by an iron-sulfur protein which is part of the nitrogenase complex. This is an energy-intensive reaction.

Nitrate reductase reduces nitrate into nitrite in the nitrogen assimilation process of the plant. Nitrate reductase contains a heme-iron molecule and two molybdenum atoms. FAD, cytochromes [Fe2/Fe3] and molybdenum [Mo(V)/(VI)] are functional parts of the nitrate reductase complex and the electron transport chain. Electrons derived from NADPH are used to reduce nitrate to nitrite. The activity of nitrate reductase is reduced during molybdenum deficiency but can be restored by adding molybdenum.

As you can see, this hard to pronounce micronutrient is important to plant functions.

Manganese – (Mn)

Deficiencies show up on young leaves first: they develop interveinal chlorosis (yellowing between veins or mottling laterally along the leaf margins). The discoloration goes from light green to white, but veins remain green. The leaves become bronze-colored, and then die.

Manganese becomes deficient if root zone or nutrient water pH goes much above 6.9. Severe Mn deficiencies cause necrotic leaf spot, premature leaf drop, and stunting of leaves, shoots and buds. Severe Mn deficiencies mimic magnesium deficiencies.

Excessive manganese interferes with plant absorption of zinc and iron. It also slows overall plant growth, and causes brown spots encircled by chlorotic circles, on older leaves.

If you are dosing plants with high amounts of calcium or phosphorus, your plants will need more manganese.

Manganese works with plant enzymes to reduce nitrates and aids in protein production. Manganese is involved in pollen germination, plant respiration, photosynthesis, and nitrogen assimilation. It activates multiple enzymes and plays a pivotal role in the chloroplast membrane system.

Iron – (Fe)

Iron deficiency is common in many plants, especially those grown indoors.

Deficiencies initially show as interveinal chlorosis in young leaves, with leaf veins green in color and older leaves unaffected. Leaves are smaller than normal.

Iron deficiency is especially a problem in alkaline conditions, or in wet, poorly root zone media. Iron becomes more bioavailable when root zone and nutrient water becomes more acidic, or when the proper chelates are bound with the iron.

Iron deficiency also reveals itself as interveinal chlorotic mottling of immature leaves. In severe cases, new leaves lack chlorophyll but show little or no necrotic spots. Chlorotic mottling of immature leaves starts first near bases of leaflets so that the middle of the leaf appears to have a yellow streak.

Cool temperatures, high humidity and wet root zone conditions create Fe deficiencies, especially if Fe is already in short supply.

Iron is difficult for plants to absorb and to transport. That’s why you should only use Advanced Nutrients nutrient formulas- they are properly chelated for fast and easy absorption of iron and other key micronutrients.

Plant uptake of Fe decreases with increased soil pH, and is adversely affected by high levels of available P, Mn and Zn in soils. Excessive iron causes bronzing of leaves with tiny brown spots.

Plants use iron for protein and nucleic acid metabolism, chlorophyll formation and electron transport. Enzymes (catalase, peroxidase, cytochromes) and photosynthesis components require iron.

The ratio of iron and sulfur available to plants directly affects their ability to take in nitrogen.

Iron in plants and root zones are mostly found bound to chelates; that’s why free iron levels are extremely low (10mM). Iron has to be reduced to Fe+ at the root surface before being transported to the cytoplasm (only grasses can absorb iron in the form of Fe3+). In the xylem iron is transported in the form of a iron-carbohydrate complex.

Iron is a key component of fertilizer formulas, which cause crops to come back to life after suffering stress, predator attack, disease, drought or excess heat.

Silicon – (Si)

Silicon is a very important plant nutrient. It is a vital component of epidermal cell walls. It strengthens plants so they can fight off diseases and resist insects, drought, heat and stress.

The performance-enhancing benefits of potassium silicate are most easily provided by using Advanced Nutrients Barricade. Advanced Nutrients Barricade substantially strengthens plants’ ability to transport nutrients and other substances in roots and internal plant cells.

Barricade increases cell wall stability, speeds up root cell replication, builds stronger and more extensive root systems, increases nutrient absorption and resistance to stress/drought, and enhances plants’ ability to resist pathogens and insects.

Barricade contains superior forms of silica that bind with roots and cells to increase strength and function. Silica is a buffering and balancing substance that helps plants deal with potentially-toxic levels of salts, minerals and pollutants.

Barricade will help give your plant a larger, stronger, more vigorous living infrastructure. Our studies show that using Barricade results in higher yield and better quality fruits, flowers, nuts and vegetables.

It’s hard to determine if plants have a deficiency of silicon, but regular doses of Barricade provide a wide range of benefits.

Zinc – (Zn)

Zinc deficiencies are among the more serious of micronutrient deficiencies and should be corrected as soon as they are diagnoses.

Deficiency first shows itself as pronounced interveinal chlorosis in young leaves and mid-shoot leaves. You might also see interveinal yellowish areas starting at leaf tip and margins and eventually affecting all growing points of the plant.

Interveinal chlorotic mottling may be mimic iron and manganese deficiencies except for that it is accompanied by tiny leaves, and rosetting (short internodes).

Other signs of zinc deficiencies include grayish brown spots that form on leaves halfway up the plant and then spread. When zinc deficiency onset is sudden, such as when zinc is not present in the nutrient solution, the chlorosis can appear to be identical to that of iron and manganese deficiency.

Excess zinc toxicity often looks like copper deficiency because it interferes with uptake of copper. Symptoms of some fungal and viral diseases can resemble symptoms of excess zinc, which can manifest as upward-curling leaves.

Excess zinc can cause iron deficiencies and in extreme cases it can cause plant death, but it is uncommon to have excess zinc. One way that excess zinc can be generated is when growers use a farm feed tank or metal garbage can for nutrient water. These are often zinc coated, and the coating can come off easily and poison your plants with toxic zinc buildup.

Also be advised that some types of manufactured lava rock root zone media contain high zinc levels.

Zinc is essential for growth regulation and regulating carbohydrate consumption. Zinc improves chlorophyll function. It’s a component in many enzymes and is important in enzyme systems, particularly for water absorption and usage. It’s essential for plant hormone balance, especially auxin (IAA) activity and electron transport.

Zinc is absorbed through roots. After it reaches the xylem it is transported as a free Zn+ ion. Plants depend on several zinc-containing enzymes, including alcohol dehydrogenase. In Super Oxide Dismutase (SOD), zinc is complexed with copper by means of a nitrogen atom from histidine. Carbonic anhydrase binds carbon dioxide, which makes it possible to reversibly store CO2 as HCO3-. This enzyme, found in the chloroplast and in the cytoplasm, consists of six subunits each of which binds a zinc atom.

Zinc is essential for protein synthesis and for the activity of RNA polymerase. Zinc also plays a role in the synthesis of tryptophan from indol thus affecting the formation of indol acteic acid by the plant.

Zinc is a critical miconutrient and must be properly provided to plants in a form that is bioavailable to them.

Greengold Farms Pampanga (GG Farms) is a market leader in low-cost agri-supplies. We provide consulting for Agro-Businesses, Foundations, LGU’s, and Multi-Purpose Cooperatives. We encourage those with a passion for agriculture to improve overall productivity.

Agricultural Productivity

Improve productivity and yield optimization by adopting efficient methods of production.


Expand produce utility and versatility to create value-added products in the production chain.

Farm Management

Reduce expenses and improve net margins by lowering input costs of labor, fertilizers, pesticides by adopting organic farming principles.

Farm to Market

Create and expand direct networks for farm producers to meet buyers, eliminating middle-men and market-makers to improve overall net profits.